1. Prepare the rock-drilling cavern, the specifications of which can be determined according to the method of drilling. Generally speaking, the height of the cavity is 2.6-2.8 meters when drilling a horizontal hole with a down-the-hole drill. When drilling upward, downward, or inclined holes, the width of the cavity is. .
1. When starting to work, carefully check whether the gas and water pipelines are firmly connected. Check for air leaks and water leaks. 2. Check whether the lubricator has been. .
When opening the hole, start the motor first, and pull the push handle of the manipulator after the transfer is normal. Make it get proper.
[pdf] 
A down-the-hole drill, usually called DTH by most professionals, is basically a jackhammer screwed on the bottom of a drill string. The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a fluid (air, water or drilling mud). The DTH hammer is one of the fastest ways to drill. .
DTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes downwards in surface-drilling. .
A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the. .
In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the fluid (air, water or drilling mud) used to. .
DTH products can be used in the following applications:• Mining- drill and blast holes in open pit mining, where the drill operator will drill several holes, then.
[pdf] 
Let me explain how a rotary screw element is built up. See this example picture of an oil-free screw element. Compressor element (oil-free type). Photo: Atlas Copco Of course, we see the two rotors (male rotor on the bottom, female rotor on the top) and the housing (the gray part). As we see the rotors have different. .
Air-ends come in many different sizes, but they all look basically the same. Here are some photos of air compressor elements. Air compressors element. This one is on a brand new. .
How does it work? Inside the compressor element are two screws (called 'rotors') that turn in opposite direction. The rotary screw compressor is. .
The rotors have the shape of what is called an "helical screw". Yes, it looks like a screw. There is a male rotor and a female rotor. Male and female helical screw rotors. The male rotor is the 'thick one', it has lobes. The female rotor is the 'thin one' and has. .
There are two basic types of screw compressor: oil-injected and oil-free. Oil-injected rotary screw compressors are the most common, since they are the cheaper ones of the two.
[pdf] 