Let me explain how a rotary screw element is built up. See this example picture of an oil-free screw element. Compressor element (oil-free type). Photo: Atlas Copco Of course, we see the two rotors (male rotor on the bottom, female rotor on the top) and the housing (the gray part). As we see the rotors have different. .
Air-ends come in many different sizes, but they all look basically the same. Here are some photos of air compressor elements. Air compressors element. This one is on a brand new. .
How does it work? Inside the compressor element are two screws (called 'rotors') that turn in opposite direction. The rotary screw compressor is. .
The rotors have the shape of what is called an "helical screw". Yes, it looks like a screw. There is a male rotor and a female rotor. Male and female helical screw rotors. The male rotor is the 'thick one', it has lobes. The female rotor is the 'thin one' and has. .
There are two basic types of screw compressor: oil-injected and oil-free. Oil-injected rotary screw compressors are the most common, since they are the cheaper ones of the two. It is equipped with two screws. The bigger screw is known as female, while the other one is known as male. The female screw comes into rotary motion due to the electric motor. The female screw is comparatively more robust than the male screw.
[pdf] A tunnel boring machine (TBM), also known as a "mole" or a "worm", is a machine used to excavate tunnels. TBMs are an alternative to drilling and blasting methods and "hand mining", allowing more rapid excavation through hard rock, wet or dry soil, or sand (although each requires specialized TBM technologies). TBM-bored tunnel cross-sections extend up to 17.6 meters (58 ft. HistoryThe was developed by Sir to excavate the in 1825. However, this was only the invention of the shield concept and did not involve the constructio. .
TBMs typically consist of a rotating cutting wheel in front, called a cutter head, followed by a main bearing, a thrust system, a system to remove excavated material (muck), and support mechanisms. Machines v.
[pdf] 
DTH is short for “down-the-hole”. Since the DTH method was originally developed to drill large-diameter holes downwards in surface-drilling applications, its name originated from the fact that the percussion mechanism followed the bit down into the hole. Applications were later found for the DTH method. .
A down-the-hole drill, usually called DTH by most professionals, is basically a screwed on the bottom of a . The fast hammer action breaks hard rock into small cuttings and dust that are evacuated by a. .
A is first thought to have been used for rock drilling in 1844. Many quarries used hand held tools that required the driller to suspend himself from a rope over the. .
In DTH drilling, the percussion mechanism – commonly called the hammer – is located directly above the drill bit. The drill pipes transmit the necessary feed force and rotation to the hammer and the bit, along with the fluid (air, water or drilling mud) used to. .
DTH products can be used in the following applications:• Mining- drill and blast holes in open pit mining, where the drill operator will drill several holes, then. Down the Hole Hammer (DTH) is a versatile horizontal drilling method, capable of tunneling through the toughest soil types and rock formations. DTH can break through cobbles, boulders, and even solid rock — which allows our team to complete installations in otherwise impenetrable ground conditions.
[pdf] 